Zhuhai 24" 3.8 Cu. Ft. Electric Dryer
Key Features:
- Button Function: Programme Selection Knob, Time,ChildLock, Dry Level, Wrinkle Release, Buzzer, Delay Start, Start/Pause, Indicator Lights: Drainage container/ Fluff Filter
- Program Selection Type: Active Wear, Mixed Fabrics, Normal, Perm Press, Heavy Duty, Towels, Wool, Denim, Air Dry, Refresh, Time Dry, Delicates, Extra Dry, Bulky, Shirts
- Additional Features: Signal, Wrinkle Care, Damp Dry Signal
- cUL-Certified: Meets strict electrical safety standards
- Warranty: 1 years for parts and labor
Specifications:
- Model: VDY-ZHUHAI-24WH
- Dimensions (W×H×D): 23.4" × 24.8" × 33.5"
- CEF (lb/kWh/cycle): 4
- Control Type: Touch Control
Pairs well with
If you have any questions about technical details, dimensions, or shipping, feel free to reach out to us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
• Free Shipping: All range hood orders over $250 USD qualify for free shipping.
• Standard Shipping: Orders typically ship via UPS Standard.
• Other Categories: Shipping fees for non-range hood products are calculated at checkout.
• Expedited Shipping: Need it sooner? Expedited shipping is available at an additional cost.
• Accessories: A flat shipping fee of $16.99 USD applies to all accessories. -
Customer Support
If you have any questions or concerns, feel free to reach us directly at 905-886-5858 or service@vesta.kitchen.
-
Troubleshooting
No Electricity After Installation
• Confirm the range hood wiring is correct.
• Check the circuit’s power supply and make sure the fuse is intact.
Vibration During Operation
• Confirm the range hood wiring is correct.
• Check the circuit’s power supply and make sure the fuse is intact.
Weak Suction
• Ensure the exhaust duct is at least 4 inches in diameter, under 10 feet in length, and has fewer than 3 turns. If any of these conditions are not met, it’s likely not a range hood issue.
• Test suction by running the hood without the duct. If it works normally, the duct setup is the problem; otherwise, contact the manufacturer.
• Check that the outlet flap is fully open. If there’s an exterior wind shield, consider removing its flap to prevent airflow obstruction.
Blower Doesn’t Rotate (Light is On)
• This may indicate a circuit board failure. Please contact the manufacturer.
Fan Wheel Stuck or Rattling
• The blower might be touching nearby wires; clean around it to remove any obstruction.
• If the fan is jammed or damaged from shipping, contact the manufacturer. -
Contact Us
We’re here for you Monday–Friday, 9 a.m.–5 p.m. EST. Call us at 1-866‑808‑3782 or email service@vesta.kitchen.
Specifications
| Model Number | VDY-ZHUHAI-24WH |
|---|---|
| Nominal Width | 24" |
| Dimensions (W×D×H) | 23.4" × 24.8" × 33.5" |
| Product Weight | 55 kg |
| Color/Finish | White |
| Electrical Requirements | 240V/ 60Hz |
|---|---|
| Rated Power | 760W |
| Rated Current | 5A |
| Motor | 1 |
|---|---|
| Heater Power | 760W |
| Spin Speeds | Spin Speeds |
| CEF (lb/kWh/cycle) | 4 |
| Dryness Level Selection | 3 |
| Capacity (Cu.ft) | 3.8 |
| Number Of Program | 15 |
| Button Function | Drainage container/ Fluff Filter |
| Program Selection Type | Active Wear, Mixed Fabrics, Normal, Perm Press, Heavy Duty, Towels, Wool, Denim, Air Dry, Refresh, Time Dry, Delicates, Extra Dry, Bulky, Shirts |
| Cycle | Heavy Dry, Strong Dry, Normal Dry, Humidty Sensor, Time Dry, Extra Dry, Bulky, Shirts, Mixed Fabrics |
| Additional Features | Signal, Wrinkle Care, Damp Dry Signal |
| Cycle Status Lights | Yes |
| Remaining Time Display | Yes |
| End of Cycle Signal | Yes |
| Noise Level(dB) | 65 |
| Control Type | Touch Control |
| Panel / Display | LED |
| Warranty (Parts & Labor) | 1 |
| Efficiency Certification | Energy star |
| Certification | UL |
Instructions
Installation
Cleaning
User Manual
Download our product user manual to find everything you need for a smooth installation and optimal performance. The manual covers:
Installation Steps
- Read the appliance manual before starting.
- Place the appliance on a stable, flat surface.
- Connect to the correct power supply as specified.
- Make sure vents and airways are not blocked.
Operating Instructions
- Plug in and switch on the appliance.
- Learn the control panel—buttons or knobs may control power, modes, and settings.
- Choose your desired setting (e.g., temperature, fan speed, timer).
- Follow any special instructions in the manual for specific functions.
Maintenance Tips
- Unplug the appliance before cleaning.
- Wipe surfaces regularly with a damp cloth.
- Clean or replace filters as recommended (if applicable).
- Check for wear or damage to cords and parts.
- Refer to the manual for troubleshooting common issues.
Safety Guidelines
- Keep children away from hot or moving parts.
- Do not use if the cord, plug, or appliance is damaged.
- Always unplug before cleaning or moving the appliance.
- Contact a professional for repairs if needed.
Be sure to read the manual thoroughly and keep it on hand for reference. If you need further assistance, our customer support team is here to help.
Live Technical Support
At Vesta, we guarantee that every customer and product inquiry is swiftly handled by a real expert. No automated responses—just personalized, professional assistance from specialists who truly care.
Mon-Fri: 9:00am - 5:30pm EST
NKBA Member Company
We are honored to be recognized by the National Kitchen & Bath Association, reflecting our commitment to offering high-quality, durable range hoods designed with our customers in mind.